Home / Technical Specification

Technical Specification

Download Now

JMJ HDPE SMOORTH GEOMEMBRANE LINER

Property Test Method JMJ 500 JMJ 750 JMJ 1000 JMJ 1500 JMJ 2000 JMJ 2500
Minimum Average              
Thickness in mm ASTM D 5199 0.50 0.75 1.0 1.5 2.0 2.5
Density g/m3 ASTM D 1505 0.94 0.94 0.94 0.94 0.94 0.94
Tensile Properties (Each Direction) ASTM D 6693            
1. Strength at yield N/mm width Type IV specimen 8 11 13 23 30 37
2. Strength at break N/mm width @ 50 mm / min 13 20 25 42 57 71
3. Elongation at yield % G. L. 33 mm 13 13 13 13 13 13
4. Elongation at break % G. L. 50 mm 700 700 700 700 700 700
Tear Resistance, N ASTM D 1004 72 92 120 175 257 320
Puncture Resistance, N ASTM D 4833 170 260 325 490 650 807
Carbon black content % ASTM D 1603 2.5 2.5 2.5 2.5 2.5 2.5
Carbon black dispersion ASTM D 5596 Satisfactory Satisfactory Satisfactory Satisfactory Satisfactory Satisfactory

JMJ LLDPE SMOORTH GEOMEMBRANE LINER

Property Test Method JMJ 500 JMJ 750 JMJ 1000 JMJ 1500 JMJ 2000 JMJ 2500
Minimum Average Value              
Thickness in mm ASTM D 5199 0.50 0.75 1.0 1.5 2.0 2.5
Density g/m3 ASTM D 1505 0.92 0.92 0.92 0.92 0.92 0.92
Tensile Properties (Each Direction) ASTM D 6693            
1. Strength at break N/mm width Type IV specimen 13 20 27 40 52 66
2. Elongation at yield % G. L. 33 mm 800 800 800 800 800 800
Tear Resistance, N ASTM D 1004 50 67 100 150 200 250
Puncture Resistance, N ASTM D 4833 120 190 250 370 500 610
Carbon black content % ASTM D 1603 2.5 2.5 2.5 2.5 2.5 2.5
Carbon black dispersion ASTM D 5596 Satisfactory Satisfactory Satisfactory Satisfactory Satisfactory Satisfactory

Please Note : The above listed noted values are only a guiding values achieved in house / independent testing laboratories, while the information presented as true and accurate representation of the attributes of the products to the best of our knowledge, no expressed or implied warranties are made, and JMJ Shelters assumes no responsibility or liability with regards to the use of this information. The right to make periodic revisions of the specifications without prior notice is reserved.